Miele Dynamic U1 Quick Reference Guide

The illustrations referred to can be found on the following pages.
Using the vacuum cleaner
Assembling the vacuum cleaner (see fig. 1)
If your vacuum cleaner is equipped with an exhaust filter Active AirClean or HEPA
AirClean, you will need to activate the exhaust filter change indicator (see
Operating Instructions, page 9).
Releasing / Rewinding the power cord (see fig. 2)
Align cord with notch (see fig. 3)
Releasing the body of the vacuum cleaner (see fig. 4)
Turning the vacuum cleaner On/Off (see fig. 5)
Selecting the flooring type (see fig.6+7)
Securing the vacuum hose and wand (see fig. 8)
Telescopic wand (see fig.9+10)
Turning the Powerbrush On/Off (see fig. 11)
Included accessories (see fig. 12)
Lifting the vacuum head (see fig. 13)
Maintenance
Airflow indicator (see fig. 14)
Opening the dust compartment (see fig. 15)
Removing the FilterBag (see fig. 16)
Inserting the FilterBag (see fig. 17)
Please see the Operating Instructions for more information on how to change
the FilterBag and exhaust filter.
en
2

Miele Dynamic U1 Specifications

General

Brand	Miele
Model	Dynamic U1
Category	Vacuum Cleaner
Language	English