To Next PageTo Next Page
Need help?Do you have a question about the Miele EGW 4060-14 and is the answer not in the manual?
General| Brand | Miele |
|---|---|
| Model | EGW 4060-14 |
| Category | Food Warmer |
| Language | English |
Ensures electrical safety by checking voltage, frequency, and earthing system compliance.
Details intended domestic use for warming plates and precautions against misuse.
Guidance for safe disposal or recycling of packaging materials.
Instructions for environmentally sound disposal of old appliances.
Overview of the plate warmer's hot air system, fan, and non-slip mat.
Procedure for initial cleaning and pre-use heating to dissipate manufacturing smells.
Details the temperature dial and on/off switch, and how to tell if the appliance is on.
Step-by-step guide on placing crockery, selecting temperature, and switching on/off.
Explains temperature settings using symbols (approx. 40°C and 60°C) for different crockery.
Factors affecting heating times and estimated durations for 6 or 12 place settings.
Information on drawer height differences and maximum load bearing capacity (25 kg).
Information on the Miele microfibre cloth for cleaning various surfaces without chemicals.
Instructions for cleaning the appliance's exterior, controls, and interior safely.
Specific cleaning advice and warnings for glass-fronted appliances to prevent scratches.
Cleaning recommendations and precautions for titanium finished appliance fronts.
Guidance on cleaning stainless steel surfaces and controls safely.
Instructions for cleaning and drying the anti-slip mat safely, avoiding the oven.
Troubleshooting steps for insufficient crockery heating, checking settings and ventilation.
Diagnosing issues with fan, heater element, or blown fuse when crockery fails to heat.
Identifying faulty temperature controls if the crockery becomes excessively hot.
Troubleshooting a defective indicator light for the appliance's on/off switch.
Essential safety guidelines and checks before installing the appliance to avoid damage.
Details building-in dimensions required for the plate warmer and combination appliances.
Guidance on placing the appliance correctly within its designated housing unit and securing it.
Instructions on how to adjust the drawer front using runners for proper alignment.
Detailed instructions for safely connecting the appliance to the mains electrical supply, including RCD advice.
Information regarding fuse replacement and safety for BS 1363 plugs in the UK.
