Cleaning and care
25
Cleaning the drawer front and
interior
The On/Off button must remain free of
grime and liquids. Failure to keep the
sensor button clean may cause it to
become unresponsive or to switch un-
controllably.
It is best to remove normal soiling im-
mediately using a clean sponge and a
solution of warm water and liquid
dish soap or with a clean, damp mi-
crofiber cloth.
Wipe with clean water afterwards.
After cleaning, dry the surfaces with a
soft cloth.
Glass cleaning agent can be used for
the appliance front.
The long exposure time of glass
cleaning agents can damage the sur-
face.
Wash off the cleaning agent immedi-
ately and make sure that no puddles
form.
Cleaning the non-slip mat
Do not clean the non-slip mat in the
dishwasher or washing machine.
Never place it in the oven to dry!
Remove the non-slip mat for clean-
ing.
Clean the mat by hand only, using
warm water and a small amount of
liquid dish soap, and then dry using a
cloth.
Do not return the non-slip mat to the
warming drawer until it is completely
dry.
To Next Page
