Due to the size and weight of the
appliance, it is essential that
installation is carried out by two
people.
Tools and accessories
required
–
Cordless screwdriver
–
Torx screwdriver
–
Hammer drill
–
Drill bits in various sizes, depending
on materials
– Hammer
– Spanner (SW 13 mm)
– Ring spanner
– Socket wrench with hexagonal bit
(8 mm)
– Adhesive tape
– Pipe wrench
–
Spirit level
–
Try-square
Other
–
Step ladder
–
Sack barrow
–
Wooden beams (min. 75 mm x
100 mm) if required, to prevent
tipping; length depends on width of
building-in niche
–
Wood screws in various sizes
Optional accessories
–
Side-by-side installation kit for
side-by-side installation of two
appliances
Connection kit for two cassette door
fronts
Instead of fitting one large door front,
you have the option of fitting two
smaller door fronts next to one another.
A metal strip is available for connecting
the two door fronts together at the
back.
When fitting the metal strip to the back
of the door fronts, pay attention to the
length of the screw and the position of
the drill holes.
Always secure the screws to the
thickest part of the furniture fronts.
Stainless steel front
Stainless steel fronts are available from
your dealer or the Miele Spare Parts
Department.
Installation
57
To Next Page
Loading...
Need help?
General
