Installation
*INSTALLATION*
46
Securing the covers
Before the cover can be installed
in the gap above the refrigeration
appliance, it must be assembled as
follows:
Insert the two parts of the cover into
one another.
Cover viewed from the side
Place the assembled cover into
the gap above the refrigeration
appliance so it clicks into place.
While doing so, slide both parts of
the cover together as required.
Installing the cover in a side-by-side
combination
Insert the pin (from the side-by-side
installation kit) halfway into the
channel in the cover for the left-hand
refrigeration appliance.
Place the second cover onto the pin
and press the two covers together.
Click the two covers together into the
gap above the refrigeration
appliances.
To Next Page
Loading...
Need help?
General
