The appliance is supplied right hand
hinged. If left hand door hinging is re
-
quired follow these instructions.
^ Close the appliance door, unscrew
the hinge bracket b, and take the
door off.
^
Take the hinge pin c out of the hinge
bracket, then refit it in the second
hole in the hinge bracket. (Use the
spanner supplied to unscrew and re
-
fit the hinge pin).
^
Remove cover a and use it to cover
the now empty holes on the opposite
side.
^
Use the spanner supplied to unscrew
upper hinge pin d and refit it on the
other side.
^
Remove stoppers f, and unscrew
handle e. Refit the handle on the
other side of the door.
^
Then refit the stoppers g on the op
-
posite side of the door.
^
Hang the door on the upper hinge
pin and close the door.
^
Fit hinge bracket b in the lower door
bearing. Then screw it securely to the
appliance plinth.
^ Use the long slots in the hinge
bracket to align the door. Make sure
you have tightened all screws prop-
erly!
Changing the door hinging
31
To Next Page
