^
Screw mounting b onto the hinge
and tighten securely.
^ Open out soft-close mechanism c
and hook it onto ball joint d.
^ Place the cover in position.
To make sure the appliance is
correctly fitted:
– The door must close properly.
– The door must not touch the furniture
carcase.
– The seal at the top edge of the
handle side must fit properly.
To double check, place a torch in the
appliance and close the door.
Turn the lights out in the room. If you
can see any light shining out from the
sides double check the installation.
Building in the appliance
49
To Next Page
Loading...
