Correct installation
~
The dishwasher must be installed and connected in compliance
with the diagram supplied.
~
Take care, both before and during installation of the
dishwasher, not to cut yourself on the metal parts. Danger
of injury. Wear protective gloves.
~
The dishwasher must be correctly aligned to ensure problem-free
operation.
~
In order to ensure stability, built-under and integrated
dishwashers must only be installed under a continuous worktop
which is secured to adjacent cabinetry.
~
If you want to convert your freestanding dishwasher to a
built-under ("U") model, you will need to order the appropriate
conversion kit. If you remove the existing plinth, you must replace it
with a U-model plinth. This is necessary to avoid the risk of injury
caused by protruding metal parts.
~
The door springs must be adjusted equally on both sides. They
are correctly adjusted when the door remains stationary when left
open at 45°. It is important that the door is held in place by the
springs and cannot fall open.
Warning and Safety instructions
13
To Next Page
Loading...
