^
Add rinse aid only until it is visible in
the opening.
The rinse aid reservoir holds approx.
110 ml.
^ Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
programme.
^ Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.
Rinse aid indicator
When the light comes on, the reservoir
contains sufficient rinse aid for2-3
programmes only.
^
Add rinse aid in plenty of time.
If you only ever use combination
products containing salt and rinse
aid in your dishwasher, you can
switch both of the indicators off if you
wish (see "Before using for the first
time - Switching off the refill
indicators").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to switch the refill indicators back
on.
Before using for the first time
27
To Next Page
Loading...
