Problem Possible cause Remedy
The Inlet/Drain and
Rinse aid indicator
lights flash
simultaneously.
Fault code FXX shows
in the Time display.
There may be a
technical fault.
–
Switch the dishwasher off
using the On/Off button K.
After a few seconds:
–
Switch the dishwasher back
on.
–
Select the programme
required with the
programme selector button.
–
Press the Start/Stop button.
If the indicator lights flash
again, there is a technical
fault.
– Call the Miele Service
Department.
The drain pump works
even when the door is
open.
Fault F70:
The Waterproof System
has reacted.
– Close the stopcock.
– Call the Miele Service
Department.
Problem solving guide
56
To Next Page
Loading...
