EasyManuals Logo

Miele G 2 Series Manual

Miele G 2 Series
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Technical Information
14
G 1xxx/G 2xxx
Function Programming Display
Adjusting the main wash
temperature
Press the Tab button 20x.
The "Tab" LED flashes 2x
slowly. Press the Program
button as appropriate to
make the desired setting.
The display shows p and a digit
alternately. Setting options: p0 =
Standard setting; p1 = Wash
temperature increased. If this option
is selected, the main wash
temperature is increased and, as a
result, the program duration is
extended.
Water quantity
normal/increased
Press the Tab button 23x.
The "Tab" LED flashes 2x
slowly and 3x rapidly
intermittently. Press the
Program button as
appropriate to make the
desired setting.
The display shows p and a digit
alternately: p0 = Normal water
quantity (standard setting); p1 =
Increased water quantity. If
increased water quantity is
selected, approx. 16.7 fl.oz.
(500mL) more water is taken in
during each water intake cycle.
Soak activation/
deactivation
Press the Tab button 24x.
The "Tab" LED flashes 2x
slowly and 4x rapidly
intermittently.
Press the Program button
as appropriate to make the
desired setting.
The display shows p and a digit
alternately. Setting options: p0 =
Soak not activated; p1 = Soak
activated.
Pre-wash activation /
deactivation
Press the Tab button 25x.
The "Tab" LED flashes 2x
slowly and 5x rapidly
intermittently. Press the
Program button as
appropriate to make the
desired setting.
The "Rinse" LED is off or flashes.
The display shows p and a digit
alternately. Setting options: p0 =
Pre-wash not activated; p1 =
Pre-wash activated.
Second interim rinse
Press the Tab button 26x.
The "Tab" LED flashes 2x
slowly and 6x rapidly
intermittently. Press the
Program button as
appropriate to make the
desired setting.
The display shows p and a digit
alternately. Setting options: p0 =
Standard setting; p1 = With second
interim rinse.
Activating/deactivating
improved drying
Press the Tab button 27x.
The "Tab" LED flashes 2x
slowly and 7x rapidly
intermittently. Press the
Program button as
appropriate to make the
desired setting.
The display shows p and a digit
alternately. Setting options: p0 =
Normal drying time; p1 = Extended
drying time.
SC (with or without cutlery
tray) - available for ID no.
-1856
Press the Tab button 28x.
The "Tab" LED flashes 2x
slowly and 8x rapidly
intermittently. Press the
Program button as
appropriate to make the
desired setting
The display shows p and a digit
alternately.
Programming function not available
at this time.

Table of Contents

Other manuals for Miele G 2 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele G 2 Series and is the answer not in the manual?

Miele G 2 Series Specifications

General IconGeneral
BrandMiele
ModelG 2 Series
CategoryDishwasher
LanguageEnglish

Related product manuals