Technical Information
44
G 1xxx/G 2xxx
Function Programming Display
Changing the main menu
Select Change main
menu. Select a wash
program for position 1,
press Continue, and do
exactly the same for
positions 2 and 3. After all
changes have been made,
confirm with Finished and
return to the main menu.
The display shows the programs
available. The order of the first
three can be modified. After fixing
and confirming a new order, the list
is shown again.
Save extras
Select Save extras.
Select a setting and
confirm with OK.
This function is activated in the
standard settings. In the display,
this is signaled with the message
On. If you do not wish to save,
select Off.
System lock activation
(G 2830 only)
Select System lock. Make
the desired selection and
confirm with OK.
This function is deactivated as
standard. This is indicated in the
display by Off. If the function is
desired, select On.
In-operation lock
(G 2830 only)
Select In operation lock.
Make the desired selection
and confirm with OK.
The display shows the setting
options Permitted and Not
possible.
Setting the temperature
format
Select Temperature.
Select a format and
confirm with OK.
The temperature can be displayed
in °C or °F as desired.
Activating/deactivating
the buzzer
Select Buzze
.
Select a setting and
confirm with OK.
The options Off, Normal and Loud
are shown in the display.
Activating/deactivating
the confirmation tone
Select Keypad tone.
Select a setting and
confirm with OK.
In the standard settings, the
confirmation tone in the form of an
acoustic signal is activated when a
button is operated. The display
indicates this with On. To switch off
the confirmation tone, select Off.
Brightness adjustment
Select Brightness. Select
a setting and confirm with
OK.
17 levels, with level 8 as the
standard setting. Brightness levels
are displayed in bar form.
Contrast adjustment
Select Contrast. Select a
setting; confirm with OK.
17 levels, with level 8 as the
standard setting. Contrast levels are
displayed in bar form.
Activating/deactivating
standby
(G 2830 only)
Select Standby. Make the
desired selection; confirm
with OK.
Options: On and Not in current
program.
Activating/deactivating
the memory
Select Memory. Select a
setting; confirm with OK.
Options: On (standard setting) and
Off. With the memory function
activated, the last selected program
can be saved.
Activating the dealer
demo mode
Select Dealer. Select a
setting; confirm with OK.
For options, see Section 2.13.
To Next Page
Loading...
Need help?
General
