Temperature
The temperature can be displayed in
°C/Celsius or °F/Fahrenheit.
The temperature is set at the factory to
be displayed in °C.
^
Select the option you want and
confirm with
OK.
Buzzer
When the buzzer is activated, an
audible tone sounds at the end of a
programme and when there is a fault.
The buzzer at the end of a programme
is deactivated as standard at the
factory.
Buzzer at the end of a programme
You will hear the buzzer at the end of a
programme in bursts of five with a short
pause in between. The buzzer will
continue to sound for up to an hour if
you do not switch the dishwasher off.
Buzzer when there is a fault
In the event of a fault, the buzzer will
sound continuously for up to two
minutes if you do not switch the
dishwasher off or correct the fault.
The buzzer will still sound if there is a
fault, even if it has been deactivated.
Setting the buzzer volume
You can select one of two options or
deactivate the buzzer.
Off:
The buzzer at the end of a programme
is deactivated.
Normal:
The buzzer sounds at a "normal"
volume.
Loud:
The buzzer sounds louder.
^ Select the volume you want or
deactivate the buzzer.
^ Confirm with
OK.
Settings menu J
76
To Next Page
Loading...
