Additional option
Drying fan running time
During the drying phase, as long as the
door of the dishwasher remains closed,
moist air is expelled through the ventila
-
tion outlet for the drying fan. The run
-
ning time of the fan can be increased to
avoid the risk of damp air condensing
on furniture fronts above the dish
-
washer. If this option is selected, the
fan running time will be increased from
4 to 45 minutes.
Activating and deactivating in-
creased drying fan running time:
^ Switch the dishwasher off using the
"On/Off" button.
^ Turn the programme selector to the
"Stop" position.
^ Press the "Start" button in and whilst
holding it in switch the dishwasher
on using the "On/Off" button. Release
the "Start" button within two seconds.
The "Salt" indicator light will flash.
Note:
If a different indicator light comes on or
flashes, the process must be repeated.
Exception:
The "Rinse aid" indicator light will come
on if you have not yet added rinse aid
or if rinse aid needs replenishing.
^
Turn the programme selector to the "9
o’clock" position.
–
If the "Start" indicator light does not
come on: the fan running time is set
to 4 minutes,
–
If the "Start" indicator light does
come on:
the fan running time is set to 45 min
-
utes.
^
Press the "Start" button to change the
setting.
Depending on the previous setting the
"Start" indicator light will either come on
or go out.
^ Turn the programme selector to the
"Stop" position.
^ Switch the dishwasher off using the
"On/Off" button.
^ The change is now stored in memory.
Operating the dishwasher
37
To Next Page
Loading...
