Miele G 4205 - Additional Options

Default settings
All settings can be reset to the factory
default.
^
Turn the dishwasher off "s".
^
Press the "Start/Stop" button and at
the same time turn the dishwasher on
"s". Hold the "Start/Stop" button until
the "Start/Stop" indicator comes on.
If it does not come on, start over.
^
Press the "Program" button 12 times.
The bottom program indicator flashes
once long and twice short in intervals.
The "Cleaning" indicator shows if a
setting was changed.
–
The "Cleaning" indicator flashes:
All settings are the factory default.
–
The "Cleaning" indicator is off:
At least one setting was changed.
^
To reset the dishwasher to the default
settings, press the "Start/Stop" button.
^
Turn the dishwasher off "s".
Additional options
29