Miele G 4920 User Manual

Before using for the first time
25
Add salt reminder
 Fill the salt reservoir with dishwasher
salt when the Salt indicator light
comes on. (If it comes on during a
programme, wait until the end of the
programme).
 Risk of corrosion.
Immediately after filling the salt res‐
ervoir, run the Sensor wash gentle 
programme with the Short  option
and without any crockery in the dish‐
washer to remove any traces of salt
from the cabinet.
After the salt reservoir has been filled,
the refill indicator may still be lit up if
the salt concentration has not yet
reached the correct level. It will go out
when the correct concentration is
reached.
The refill reminder will be switched off if
you have programmed the dishwasher
for a water hardness below 0.9 mmol/l
(5 °d - German scale).
If you only ever use combination prod‐
ucts in your dishwasher, you can
switch both refill reminders for salt
and rinse aid off if you wish (see "Pro‐
gramme options - Refill reminders").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add salt
and rinse aid and to switch the re‐
minders back on.

Miele G 4920 Specifications

General

Door color	White
Control type	Buttons
Product size	Full size (60 cm)
Built-in display	Yes
Appliance placement	Freestanding
Cutlery compartment type	Basket
Cycle time	196 min
Noise level	46 dB
Delay start (max)	24 h
Dishwashing programs	Auto, Eco, Intensive
Number of place settings	13 place settings
Number of washing programs	5
Drying class	A
Annual water consumption	2772 L
Annual energy consumption	262 kWh
Current	10 A
Connected load	2100 W
AC input voltage	230 V
Power consumption (off)	0.2 W
Water consumption per cycle	6.5 L
Energy consumption per cycle	0.93 kWh
Package weight	60500 g

Weight and Dimensions

Depth	600 mm
Width	598 mm
Height	845 mm
Weight	52500 g