EasyManua.ls Logo

Miele G 5000 - Reassembling Spray Arms and Trays; Refitting Spray Arms Correctly; Inserting the Cutlery Tray

Miele G 5000
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and care
71
Refitting the spray arms
Reinstall the upper spray arm and
tighten it by hand.
Reinstall the middle spray arm.
Refit the lower spray arm and ensure
that the filter combination lies flat in
the base of the wash cabinet.
Rotate the screw thread of the lower
spray arm clockwise until the arrow in
the viewing window points to the lock
symbol.
Make sure the spray arms can rotate
freely.
Damage due to soiling entering
the circulation system.
The lower spray arm is used to
secure the filter combination.
Without filters, coarse soiling can
enter the circulation system and
cause a blockage.
Do not run a wash programme
without the lower spray arm or
without the filters fitted.
Inserting the cutlery tray (if present)
Slide the cutlery tray back onto the
rails from the front.
Replace the safety clips in the rails on
both sides of the cutlery tray.

Table of Contents

Other manuals for Miele G 5000

Related product manuals