Installation
*INSTALLATION*
92
Venting the water drainage
If the on-site drainage connection is
situated lower than the guide for the
rollers of the lower basket in the door,
the drainage system must be vented.
Otherwise, a siphoning effect during a
programme can cause the appliance to
empty itself of water.
Open the dishwasher door fully.
Remove the lower basket.
Insert a screwdriver into the middle
opening of the vent valve in the left
wash cabinet wall.
Press the screwdriver further into the
opening and push it through the
membrane behind.
The vent opening for the water drain is
now open.
To Next Page
Loading...
