Miele G 5500 - Starting and Selecting Wash Programs

Turning on
^
Make sure the spray arms can rotate
freely.
^
Close the door.
^
Open the water supply, if it is closed.
^
Press the K button to turn the
dishwasher on.
The last program selected will appear
in the display and the appropriate
indicator light will come on.
After a short while, the estimated
program duration for the program
selected will appear in the display.
Selecting a program
Choose your program according to the
type of load and soiling.
See the "Program Guide" for more
information.
^ Select the desired program with the
Program selection button.
The indicator light for the selected
program will come on.
Additional options can now be
selected, if desired (see "Additional
Options").
Starting a program
^
Press the "Start / Stop" button.
The program starts.
If additional options are selected, the
corresponding indicators will also light
up.
Cancel a program only in the first
few minutes.
Otherwise important program steps
(e.g. the water softening) may be
interrupted.
Use
33