Temperature
The temperature can be displayed in
"°C/Celsius" or "°F/Fahrenheit".
The temperatures are shown in
°C/Celsius by default.
^
Select the desired temperature unit
and confirm with
OK.
Volume
When the buzzer is activated, a tone
sounds at the end of a program and if a
fault occurs.
Buzzer at the end of a program
The buzzer at the end of a program
sounds five times in intervals with a brief
break in between. The buzzer sounds up
to one hour if the dishwasher in not
turned off.
Buzzer in case of a fault
The buzzer for a fault sounds
continuously. The buzzer sounds up to
two minutes if the dishwasher is not
turned off or the fault is fixed.
The buzzer for a fault cannot be set
to off.
Buzzer tone
The buzzer volume can be set to 7
different levels.
The buzzer cannot be turned off in
case of a fault.
^
Select the desired volume.
^
Confirm with
OK.
Night time buzzer tone
You can set the buzzer tone used at
night to a different volume.
^ Select the desired volume.
^ Confirm with
OK.
Night time
The buzzer can also be turned off
during the night time hours.
^ Select
Start time.
^ Set the start time using the
+/- touch
controls, confirm with
OK.
^
Select
End at.
^
Set the end time using the
+/- touch
controls, confirm with
OK.
^
Confirm with
OK.
Keypad tone
A tone will sound when a button is
pressed.
The volume can be set to 7 different
levels.
^
Select the desired setting and
confirm with
OK.
Settings !
56
To Next Page
