Problem solving guide
71
Water drainage fault
Problem Cause and remedy
The In-operation indic-
ator is flashing quickly.
The buzzer is sounding.
The Inlet/Drain indic-
ator is flashing and fault
code has appeared
in the display.
Before rectifying the problem:
Switch the dishwasher off with the button.
The water outlet is restricted.
There might be water in the wash cabinet.
Clean the filter combination (see "Cleaning and
care, Cleaning the filters").
Clean the drain pump (see "Maintenance").
Clean the non-return valve (see "Maintenance").
Remove any kink or loop in the drain hose.
To Next Page
