Problem solving guide
71
Water drainage fault
Problem Cause and remedy
The In-operation indica‐
t
or is flashing quickly.
The buzzer is sounding.
The Inlet/Drain indica‐
tor is flashing and fault
code has appeared
in the display.
Before rectifying the problem:
Switch the dishwasher off with the
button.
The water outlet is restricted.
Ther
e might be water in the wash cabinet.
Clean
the filter combination (see "Cleaning and
care, Cleaning the filters").
Clean
the drain pump (see "Maintenance").
Clean
the non-return valve (see "Maintenance").
Remove any ki
nk or loop in the drain hose.
To Next Page
