Before using for the first time
22
Basic settings
Switch the dishwasher on with the
butt
on.
The welcome screen will appear when
the dishwasher is switched on for the
first time.
Language
The display will change automatically to
the scr
een for setting the language.
Use the arr
ow buttons to select
the language you want and also the
country, if appropriate, and confirm
your selection with
OK.
To learn about the display, read the
section with the same name.
A tick will appear ne
xt to the lan‐
guage that has been set.
Time of day
The display will then change to the
scr
een for setting the time.
The time of day needs to be set before
the "Fle
xiTimer" programme option can
be used.
You can also show the current time of
day in the display.
Use the arrow buttons to set the
hour and confirm with OK.
The
n set the minutes and confirm
with
OK.
Keeping the arr
ow buttons press‐
ed in will increase or decrease the
time automatically.
The display will then change to the
screen for setting the clock display.
Select whether or not the time of day
should appear in the display and
confirm your selection with OK.
If you have selec
ted Display On, con‐
firm the message about higher ener‐
gy consumption with
OK.
To Next Page
Loading...
Need help?
General
