Miele G 6500 - Page 52

Options
52
EcoStart
The FlexiTimer
function allows you to
take advantage of time variable econo‐
my rates of electricity. Before you can
use this option, you must set up to
three electricity rate time zones (see
"Settings menu - EcoStart").
You then set the latest time at which the
program selected should end.
The dishwasher will start automatically
in the cheapest rate zone within the
time set.
 Use the  arr
ow buttons to set the
hour and confirm with
OK.
The hour will be saved and the minute
number block will
be highlighted.
 Use the  arr
ow sensors to set the
minutes and confirm with
OK.
The estimated start time of the program
select
ed will appear in the display.
The  and
Start indicat
or lights will
light up.
The program selected will start auto‐
matically in the cheapest time zone and
will fini
sh at the latest at the finish time
set.
The time remaining will appear in the
display, the  indicator light will go out
and the indicator light for the program
selected will light up.
Changing or deleting set times
You can change the set times or the
pr
ogram before the start time in the dis‐
play is reached.
 P
ress the  button.
 Use the  arr
ow buttons to select
the setting you want to change and
confirm with
OK.
 Use the  arr
ow buttons to select
the Change or Delete function and
confirm with
OK.
After confirming the Change function,
you can change the set time.
After confirming the Delete function, the
pr
ogram duration will appear in the dis‐
play and the program will start.
The  indicator light will go out and the
Start indicat
or light will light up.
If you open and close the door again
befor
e the start time is reached, the
message Continue with Start will appear
in the display. Press the
Start
button
to restart the FlexiTimer.