Switching on and off
Switching on
Close the door.
Open the stopcock (if closed)
Turn the programme selector switch
(Programme sequence indicator)
clockwise, until a resistance is felt, to
the "Start" point of the required pro-
gramme e. g. UNIVERSAL PLUS.
For TOP SOLO-programmes turn the
programme selector to ECONOMY/
TOP SOLO.
If you turn the selector past the
"Start point"by mistake:
Turn the temperature selector switch
to "0-Off".
Turn the programme selector switch
in a clockwise direction to the re-
quired start point.
Re-set the temperature with the tem-
perature selector switch.
Then turn the Temperature selector
switch to the required temperature
e.g. "65 °".
For TOP SOLO-programmes turn
the temperature selector switch anti-
clockwise to TOP SOLO 55 ° or TOP
SOLO 65 °.
The programme cycle begins.
Switching off
On completion of a programme:
Turn the temperature selector to "0-
Off“
If the dishwasher is not to be used for a
longer period of time, eg whilst on holi-
day:
Turn off the stopcock.
Switching on and off
32
To Next Page
Loading...
