Problem solving guide
79
Water drainage fault
Problem Possible cause and remedy
The In-operation
indicator is flashing
quickly.
The buzzer is sounding.
The Inlet/Drain
indicator light is
flashing and fault code
has appeared in the
display.
Before rectifying the problem, you must:
Switch the dishwasher off with the button.
The water outlet is restricted.
There might be water in the wash cabinet.
Clean the filter combination (see "Cleaning and
care - Cleaning the filters").
Clean the drain pump (see "Maintenance").
Clean the non-return valve (see "Maintenance").
Remove any kink or loop in the drain hose.
To Next Page
