Miele G 6860 - Page 72

Problem solving guide
72
Problem Cause and remedy
The In-operation indic-
ator is flashing quickly.
The buzzer is sounding.
One of the following
faults is shown in the
display:
Before rectifying the problem:
 Switch the dishwasher off with the  button.
Fault FXX There may be a technical fault.
After a few seconds:
 Switch the dishwasher back on.
 Select the programme you want.
 Close the door.
If the fault message appears again, there is a tech-
nical fault.
 Call the Miele Service Department.
Waterproof The Waterproof system has reacted.
 Close the stopcock.
 Call the Miele Service Department.
Fault F78 A fault has occurred in the circulation pump.
 Switch the dishwasher off for at least 30 seconds
with the  button.
 Switch the dishwasher back on.
 Select the programme you want.
 Close the door.
If the fault message appears again, there is a tech-
nical fault.
 Call the Miele Service Department.