Miele G 7107 SCU XXL User Manual

Problem solving guide
71
Door release
Problem Cause and remedy
The following fault is in-
dicated via the display:
Before rectifying the problem:
 Switch the dishwasher off.
Fault F33 The door does not open automatically.
There may be a technical fault.
 Open the door manually (see “Before using for the
first time” chapter, “Opening the door” section)
and switch the dishwasher off and then back on
again.
 If the same fault message appears again, call
Miele Service.
The door locking pins do not retract after the door is
opened.
There may be a technical fault.
 Switch the dishwasher back on.
 If the same fault message appears again, call
Miele Service.

Miele G 7107 SCU XXL Specifications

General

Width	60 cm
Noise Level	44 dB
Noise emission class	B
Capacity	14 place settings
Drying System	AutoOpen drying
Control Type	Electronic
Control panel colour	Black
Built-in display	Yes
Inlet hose length	1.5 m
Outlet hose length	1.5 m
Cord length	1.5 m
Weight	50 kg
Delay start	Yes
Child lock	Yes
Appliance placement	Built-in
Product size	XXL
Depth	60 cm
Water Consumption	9.5 L
Wash Programs	Auto, Eco, Intensive, Quick