Miele G 7151 - Water Drainage Fault

Frequently Asked Questions
73
Water drainage fault
Problem Possible cause and solution
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
The following message
appears on the display:
Drain
Before remedying the fault:
 Turn off the dishwasher.
Water drainage fault.
There might be water in the wash cabinet.
 Clean the filter combination (see “Cleaning the fil-
ters” under “Cleaning and care”).
 Clean the drain pump (see “Cleaning the drain
pump” under “Cleaning and care”).
 Remove any kink or loop in the drain hose.