Problem solving guide
71
Door release
Problem Possible cause and solution
The in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
The following fault is
indicated via the
display:
Before remedying the fault:
Switch the dishwasher off.
Door fault The door does not open automatically.
There may be a technical fault.
Open the door manually (see “Opening the door”
under “Before using for the first time”) and turn the
dishwasher back on again.
If the same fault message appears again, contact
Miele Service.
The door locking pins do not retract after the door is
opened.
There may be a technical fault.
Turn the dishwasher back on.
If the same fault message appears again, contact
Miele Service.
To Next Page
Loading...
