Miele G 7160 SCVi AutoDos User Manual

Operation
67
Switching off the dishwasher
 Open the door.
 The dishwasher can be switched off
at any time using the button.
 Confirm the query Switch off with OK.
Switching the dishwasher off during a
programme stops the programme.
You can also do this to stop an ongoing
timer.
 Risk of damage from leaking wa-
ter.
Water leakage can cause damage.
If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on holiday, the stopcock
should be closed as a precaution.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are comfortable
enough to handle before unloading
them.
If you open the door fully after switching
off, the dishes will cool much faster.
 First unload the lower basket, then
the upper basket and finally the 3D
MultiFlex tray (if present).
This will prevent water drops from the
upper basket and 3D MultiFlex tray
from falling onto the dishes in the
lower basket.

Miele G 7160 SCVi AutoDos Specifications

General

Door color	Not applicable
Water fill	Hot
Cord length	1.5 m
Control type	Buttons
Product size	Full size (60 cm)
Custom panel-ready	Yes
Outlet hose length	1.7 m
Appliance placement	Fully built-in
Control panel color	Stainless steel
Cutlery compartment type	Drawer
Cycle time	199 min
Noise level	43 dB
Drying system	Condensation
AquaStop function	-
Delay start (max)	24 h
Dishwashing programs	Auto, Eco, Intensive 75°C, Quick, Silent, Super 60°C
Number of place settings	14 place settings
Number of washing programs	7
Current	10 A
Connected load	2000 W
AC input voltage	230 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	8.4 L

Weight and Dimensions

Depth	570 mm
Width	598 mm
Height	805 mm
Weight	47000 g
Depth with door open	1165 mm
Installation compartment width	600 mm
Installation compartment height (max)	870 mm