Frequently asked questions
85
Door release
Problem Possible cause and solution
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
The following fault is in-
dicated via the display:
Before remedying the fault:
Turn off the dishwasher.
Door fault The door does not open automatically.
There may be a technical fault.
Open the door manually (see “Opening the door”
under “Before using for the first time”) and turn the
dishwasher back on again.
If the same fault message appears again, contact
Miele Customer Service.
The door locking pins do not retract after the door is
opened.
There may be a technical fault.
Turn the dishwasher back on.
If the same fault message appears again, contact
Miele Customer Service.
To Next Page
Loading...
Need help?
General
