The display will change to show the programme menu.
^
Select
Start.
^
Close the door.
When the set time is reached, the programme selected will
begin automatically.
The , indicator light will go out.
To save energy, the dishwasher will switch to Standby
mode a few minutes after the last time a button has been
pressed. The display and the indicator lights will go out.
Starting a programme before the start time has been reached:
You can start a programme before the set start time has been
reached. Proceed as follows:
^ Open the door.
^ Select
Cancel and confirm with OK.
The , indicator light will go out.
Sensor wash
12:00
Programme finished
Main menu }
^
Select
Main menu.
^
Select the programme you want.
^
Select
Start.
^
Start the programme by closing the door.
The In-operation indicator light comes on to show that a
programme has been started.
Additional functions
52
To Next Page
Loading...
