Miele G7104 - Cleaning the Drain Pump

Cleaning and care
82
Cleaning the drain pump
If water remains in the wash cabinet
after the end of a programme, the water
has not been pumped away. The drain
pump may be blocked by foreign
objects. These foreign objects are easy
to remove.
 Disconnect the dishwasher from the
power supply.
To do this, switch off at the socket
and withdraw the plug.
 Take the filter combination out of the
wash cabinet (see “Cleaning and care
- Cleaning the filters”).
 Scoop the water out of the wash
cabinet using a suitable container or
utensil.
 Press the catch of the drain pump
cover inwards.
 Tip the cover inwards until it is
released.
 Rinse the cover thoroughly under
running water and remove all foreign
objects.