Adjust the rear leveling legs to the re-
quired height.
To raise the machine - turn clockwise.
To lower the machine - turn counter-
clockwise.
Several turns may be needed to set the
correct height. A low speed electric or
cordless screwdriver can also be used.
Adjust the front leveling legs by push-
ing on the foot with a slotted screw-
driver.
Tipping the machine slightly, if
possible, will make adjusting the front
legs easier. Make sure the machine is
level when adjustments are complete.
The dishwasher should be raised until it
just touches the underside of the counter-
top.
Dishwasher installation
49
To Next Page
Loading...
