Technical safety
~
Before using the vacuum cleaner and its accessories,
check for any visible signs of damage. Do not use a
damaged appliance.
~
Ensure that the connection data on the data plate of the
vacuum cleaner (voltage and frequency) match the mains
electricity supply exactly.
~
The mains electrical plug must be fitted with a 13 A fuse
(UK).
~
While the vacuum cleaner is under guarantee, repairs
should only be undertaken by a Miele authorised service
technician. Otherwise the guarantee will be invalidated.
~
Do not pull or carry the vacuum cleaner by the cable,
and be careful not to damage the cable when withdrawing
the plug from the socket.
Keep the cable away from sharp edges and do not let it
get squashed, for example, under a door.
Avoid running the vacuum cleaner over the cable. This
could damage the cable, plug or socket. The appliance
must not be used if any of these have suffered damage.
~
Do not use the vacuum cleaner if the cable is damaged.
If the cable is damaged it must be replaced together with a
complete cable rewind. For safety reasons this work must
be done by the Miele Service Department or a Miele
authorised service technician.
~
The socket on the vacuum cleaner (depending on
model) must only be used for the Miele Electrobrush listed
in these operating instructions.
en - Warning and Safety instructions
30
To Next Page
Loading...
Need help?
General
