en - Securing a side-by-side combination
9
Remove the two screws from the
tops of the appliances.
Use these screws to secure the sup-
plied anti-tip brackets.
Both anti-tip brackets can be found in
the refrigeration appliance installation
kit.
In addition, press both anti-tip brack-
ets together with a pipe wrench.
From the top, insert the shorter of the
supplied metal clips into the fixing
lugs. If required, use a hammer.
Now loosen the screws on the tops of
the appliances again and remove
both anti-tip brackets.
You will need the anti-tip brackets to
secure the niche.
To Next Page
Loading...
Need help?
General
