Do you have a question about the Miele FN 9752 i and is the answer not in the manual?
Information on the environmentally friendly disposal of transport and protective packing materials.
Guidelines for the environmentally responsible disposal of old electrical appliances.
Details the intended domestic use for storing frozen food, freezing fresh food, and making ice.
Precautions and warnings regarding the safe use of the appliance by children.
Covers safe installation, handling of coolant, electrical connection, and wiring safety.
Instructions for safe handling of frozen food, ice, and avoiding fire/explosion hazards.
Instructions for making the appliance unusable before disposal to prevent child entrapment.
Guidance on initial appliance setup and cleaning before first use.
Instructions for turning the appliance on and off, and initial cooling.
Details on the safety lock feature and the use of the cool pack accessory.
Instructions for safely switching off the appliance for extended absences like holidays.
Detailed steps for adjusting the freezer temperature using the control panel buttons.
Specifies the adjustable temperature range for the freezer compartment.
Explanation of what the temperature display shows during normal operation and flashing conditions.
Instructions on how to adjust the brightness level of the temperature display.
Details the conditions that trigger a temperature alarm and its indications.
Explains the door alarm function and when it sounds if the door is left open.
Clarifies that the alarm system is always active and does not require manual switching.
Instructions on how to manually switch off the alarm before the set temperature is reached.
Conditions when the SuperFreeze function is not required, e.g., already frozen food.
Procedure for activating SuperFreeze, including timing based on load size.
Information on automatic and manual switching off of the SuperFreeze function.
Details the maximum amount of food that can be frozen within a 24-hour period.
Guidance on freezing fresh food quickly to preserve quality and texture.
Advice on checking purchased frozen food and storing it correctly in the freezer.
General advice on freezing fresh food in good condition.
Lists suitable and unsuitable foods for freezing, and blanching techniques.
Guidance on portioning food and using appropriate packing materials for freezing.
Recommendation to use SuperFreeze before adding large quantities of fresh food.
Instructions on where and how to place food in drawers for efficient freezing.
Guidance on how to freeze large items like turkeys by removing glass cold plates.
Information on the freezer calendar indicating storage times for different foods.
Methods for defrosting frozen food, including hygiene precautions for poultry.
Instructions for filling and removing ice cube trays from the freezer.
Warning about cooling drinks quickly to prevent bottles from bursting.
Instructions for using the freezer tray to freeze small items individually.
Guidance on using the cool pack to maintain temperature during power cuts or for separating food.
Steps to take before cleaning, including switching off and removing food.
Instructions for washing and drying the appliance interior and removable parts.
Importance of cleaning ventilation gaps to maintain appliance efficiency and prevent dust build-up.
Advice on cleaning the door seal and avoiding oils/grease that can damage it.
Steps to follow after cleaning, including reconnecting power and using SuperFreeze.
Addresses issues like lack of cooling, door opening problems, temperature too low, and compressor cycling.
Covers issues like frozen food, alarms, display errors, indicator light faults, and inability to switch off.
Explains frost build-up on the front panel is normal condensation and how to manage it.
Describes common operational noises like humming, gurgling, clicking, and cracking.
Identifies causes of rattling/vibrating noises and solutions like realignment or checking components.
Guidance on selecting a suitable, dry, well-ventilated location away from heat sources.
Information on the designed ambient temperature ranges for optimal appliance operation.
Requirements for adequate ventilation gaps behind and around the appliance for efficient operation.
Steps to take before installation, including removing transit bars and accessories.
Guidance for reusing furniture doors from appliances with different hinging mechanisms.
Information on ordering a stainless steel front panel as an alternative.
Steps for opening the appliance door and removing covers and screws for hinging change.
Instructions on how to carefully remove the soft-close mechanism from the door.
Steps for re-attaching the soft-close mechanism to the door after hinging change.
Information on the maximum permitted weight for furniture doors to avoid hinge damage.
Specific requirements for building the appliance into a peninsular run configuration.
Instructions for ensuring the housing unit is correctly aligned and at right angles before installation.
Steps for preparing the appliance, including fitting cover strips and spacers.
Details fitting procedures based on furniture wall thickness (16mm and 19mm).
Instructions for securing the appliance within the housing unit using screws.
Steps for attaching the furniture door to the appliance, including fitting aids and brackets.
Guidance on aligning the furniture door with neighbouring doors using side and height adjustments.
Detailed steps for securing the appliance door to the furniture door, ensuring correct alignment and gaps.
Checks to ensure proper door closure, clearance, and seal fit, with a light test.