Fitting the stainless steel hose
to the appliance
When fitting the stainless steel hose,
make sure that it is neither kinked
nor damaged.
^ Remove the cap (1.) from the water
connection at the front of the
appliance.
^ Screw the stainless steel hose
coupling nut (2.) onto the threaded
union (3.).
^
Ensure that all connections are water
tight.
^
Turn on the tap slowly and check the
whole water system for leaks.
^
The appliance can then be
connected to the electricity supply
(see "Electrical connection").
After a maximum of 10 hours, the first
ice cubes will drop out of the ice
cube maker and collect in the
container.
Mains water connection
66
To Next Page
Loading...
Need help?
General
