Before first use
66
Before first use
Allow the appliance to stand for ap-
prox. 1hour prior to connecting it to
the power supply.
This will help prevent any malfunc-
tions.
Packaging material
Remove all packaging material from
the inside of the appliance.
Leftover tape residue.
Always remove all packaging mate-
rial, including adhesive tape, before
switching on the appliance.
Cleaning
Please refer to the relevant instruc-
tions in “Cleaning and care”.
Clean the inside of the appliance and
the accessories.
Choosing the right Door Assistant
(Push2Open/Pull2Open)
The Door Assistant helps you to open
the appliance door.
You can choose between the two Door
Assistants Push2Open and Pull2Open
(see “Selecting additional settings –
Switching on the Door Assistant ”).
The default Door Assistant is
Push2Open.
Select the
Pull2Open Door Assistant if your appli-
ance has a cabinet front with a han-
dle.
Select the
Push2Open Door Assistant if your ap-
pliance has a handle-free cabinet
front.
Adhering labels for the MasterFresh
zone
Stick on the labels as described in
the following section before switch-
ing on the refrigeration appliance.
The labels will not stick to a cold sur-
face. Furthermore, there should not be
any dust or grease on the surface.
– Humidity-controlled compartment
for fruit and vegetables
Remove the label from the foil and
stick it onto the frame of the humid-
ity-controlled compartment (see
“Product description”).
To Next Page
Loading...
Need help?
General
