Never use cleaning agents contain
-
ing abrasive substances such as
sand, soda, acids or chemical sol
-
vents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
For stainless steel surfaces, use a
proprietary stainless steel cleaning
agent.
Make sure that no water can pene
-
trate into the electronic unit or into
the light.
Do not let water get into the drain-
age channel and drain hole when
cleaning.
Never use steam cleaning appara-
tus to defrost or clean the appliance.
Pressurised steam could reach the
electrical components and cause a
short circuit.
The data plate located inside the ap
-
pliance must not be removed. It
contains information which is re
-
quired in the event of a service call.
Before cleaning
^
Switch the appliance off by pressing
the On-Off switch.
^
Take any food out of the appliance
and store it in a cool place.
^
Take out any removable parts e.g.
shelves for cleaning.
Cleaning the outer casing, the
interior and accessories
^
Clean the refrigerator section at least
once a month and the freezer section
at regular intervals.
^
Accessories and shelves should all
be hand washed. The butter dish is,
however, dishwasher safe.
^
Clean the condensate channel and
drain hole frequently, so that conden
-
sate can drain away unhindered. Use
a straw or similar to clear the drain if
necessary.
^ Clean stainless steel surfaces with a
suitable cleaning agent.
^ After cleaning, wipe the outer casing,
the interior and accessories with a
damp cloth and dry with a soft cloth.
Leave the doors open to air the appli-
ance for a short while.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part Number 98013530, which is suit
-
able for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals. It
can be washed 300 times.
If you are unsure about a particular
product or need further advice
please contact your nearest Miele
Sales office. See back page for ad
-
dress.
Cleaning and care
28
To Next Page
Loading...
