Switching off the ice cube
maker
The ice cube maker can be switched
off independently of the freezer section
if you do not want the appliance to
make any ice cubes.
^ Press the On/Off button on the ice
cube maker until the indicator light
goes out.
If the ice cube maker is switched off,
the ice cube drawer can be used as an
extra drawer for freezing fresh food and
storing frozen food.
Clean the ice cube tray if the ice
cube maker is going to be switched
off for a long period of time.
Setting the water intake time
for the ice cube maker
The size of the ice cubes produced
depends on the water pressure present
and the water intake time which has
been set for the ice cube maker.
If the ice cube maker is only producing
small ice cubes the water pressure is
low. In order to produce larger ice
cubes, the water intake time for the ice
cube maker needs to be prolonged.
^
Switch the ice cube maker on.
^ Touch and leave your finger on the X
sensor.
^
At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^
Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^
Touch the X sensor repeatedly until e
appears in the display.
^
Touch the On/Off sensor.
^
Touch the X sensor repeatedly until
e2appears in the display.
^
Touch the On/Off sensor.
Making ice cubes
47
To Next Page
Loading...
Need help?
General
