How to switch off a Miele KFNS 37432 iD Refrigerator that won't turn off?
If your Miele Refrigerator cannot be switched off, the safety lock may be activated. If the corresponding symbol is illuminated in the display, switch off the safety lock (see "Additional settings - Deactivating the safety lock").
What to do if Miele KFNS 37432 iD temperature is too low?
If the temperature in your Miele Refrigerator is too low, consider the following: * The temperature setting might be too low. Correct the temperature setting. * The freezer door may not be properly closed. Check that the freezer door closes correctly. * A large amount of food was frozen at once. Refer to the section about freezing and storing food. * The SuperCool function might still be active. Turn it off by pressing the SuperCool button to save energy. Note that it switches off automatically after approximately 12 hours. * The SuperFreeze function might still be active. Turn it off by pressing the SuperFreeze button to save energy. Note that it switches off automatically after approximately 30 - 65 hours.
What to do if my Miele Refrigerator is not getting cold but the light is on?
If your Miele Refrigerator isn't getting cold but the controls and interior lighting are working, the Demo mode might be activated. If the corresponding symbol is illuminated in the display, switch off the Demo mode (see "Information for dealers - Demo mode").
What to do if food is frozen together in my Miele KFNS 37432 iD?
General| Brand | Miele |
|---|---|
| Model | KFNS 37432 iD |
| Category | Refrigerator |
| Language | English |
Covers appropriate use, child safety, and general operational warnings.
Addresses refrigerant safety, electrical hazards, and environmental considerations.
Safety protocols for cleaning, transport, and disposal, including Proposition 65.
Advises on safe disposal and recycling of packaging materials.
Instructions for proper disposal of old appliances and electronic waste.
Optimizing energy use through proper installation and regular maintenance.
Efficient use of the appliance and proper food storage for energy saving.
Details the buttons and functions of the appliance's control panel.
Explains the meaning and function of various symbols displayed on the appliance.
Identifies and labels the main internal and external parts of the appliance.
Lists and describes accessories supplied with the appliance.
Presents optional accessories available for purchase.
Essential preparation steps before the first use of the appliance.
Detailed instructions for switching on the appliance and its initial display.
Procedures for turning off the entire appliance or individual sections.
Guidelines for safely switching off the appliance for extended periods.
Recommends the ideal temperature for the refrigerator compartment.
Specifies the required temperature for freezing and storing food in the freezer.
Explains how to read and adjust temperature settings for both sections.
Guide to using the SuperCool feature for rapid chilling in the refrigerator.
Instructions for using SuperFreeze to quickly freeze fresh food in the freezer.
Details the temperature alarm, its triggers, and how to silence it.
Explains the door alarm, its activation, and how to cancel it.
How to activate and deactivate the safety lock to prevent unauthorized changes.
Instructions to switch between Celsius and Fahrenheit display units.
How to manage button tones and alarm sounds for user preference.
How to adjust the brightness of the appliance display.
Information on activating and using Sabbath mode for religious observance.
How to activate and reset the indicator for carbon filter replacement.
Explains the different temperature zones within the refrigerator for optimal storage.
Identifies warmest and coldest areas and suggests suitable foods for each.
Lists foods sensitive to cold that should not be refrigerated.
Guidelines for proper packaging, hygiene, and storage to prolong food life.
How to move or remove door shelves for customized storage.
How to adjust shelves, including those with integrated lighting.
Instructions for positioning the bottle rack within the appliance.
Steps for removing and replacing the fruit and vegetable drawer.
Instructions on how to move the carbon filter holder within the appliance.
Information on maximum freezing capacity and the effects of freezing on food.
Tips for storing purchased frozen food, home freezing, and packaging.
Techniques for optimal freezer loading, storage times, and defrosting methods.
Safe drink cooling and using freezer accessories like ice trays and cool packs.
Explains the automatic defrosting process for the refrigerator section.
Describes the 'NoFrost' system for automatic freezer defrosting.
Lists recommended and prohibited cleaning agents for appliance surfaces.
Steps to take before cleaning, including switching off and removing parts.
Instructions for safely removing shelves and trims for cleaning.
How to clean the interior, dishwasher-safe parts, and non-dishwasher parts.
Detailed instructions for replacing the carbon filters in the holder.
Troubleshoots issues with cooling, compressor operation, and temperature variations.
Interprets display messages for safety lock, alarms, filter indicators, and power outages.
Addresses issues with interior lighting, shelf lighting, and door seals.
Guides users on handling fault codes and other common problems.
Explains common operational sounds like humming, gurgling, clicking, and cracking.
Solutions for noises caused by uneven leveling, contact with furniture, or loose parts.
Guidance on contacting Miele service for faults, including required information.
Information on warranty conditions and how to obtain details.
Explanation of demo mode for showroom displays, where cooling is off.
Step-by-step instructions to activate demo mode for appliance demonstration.
Step-by-step instructions to turn off demo mode and return to normal operation.
Critical safety warnings for electrical connection, grounding, and plug usage.
Details on voltage, frequency, amperage, and circuit requirements for operation.
Guidelines for accessible outlets, disconnect devices, and power cord precautions.
Information on installing appliances adjacent to each other.
Guidance on selecting a dry, well-ventilated room away from heat sources.
Explains climate classes (SN, N, ST, T) and their corresponding room temperature ranges.
Details ventilation needs, airflow paths, and importance of keeping slits clear.
Requirements for cabinet doors, including thickness and weight limits.
Guidance on calculating cabinet door width and height, including required gaps.
Provides detailed examples and formulas for calculating cabinet door heights.
Steps for preparing the appliance before installation.
Instructions for removing transport safety devices and covering holes.
Instructions on removing the wall spacer to fit the appliance into shallower niches.
Diagram and table showing required niche dimensions for proper installation.
Instructions for limiting the appliance door opening angle using locking pins.
Lists necessary tools and initial steps for changing door hinges.
Instructions for removing covers around the door hinges.
Steps for loosening hinge screws and removing appliance doors.
Detailed steps to unscrew and remove the soft-close mechanism from the door.
Steps to reattach the soft-close mechanism and secure appliance doors.
General requirements for building the appliance into cabinetry.
Lists the tools needed for installing the appliance into cabinetry.
Lists numbered parts required for building the appliance into a niche.
Steps for positioning the appliance and attaching fixing brackets to the door.
Ensuring correct appliance positioning and maintaining a specific gap within the niche.
Details dimensions for cabinetry with door fittings and aligning the appliance.
Steps for pushing the appliance into the wall and fixing brackets securely.
Using batons and handles for enhanced appliance security within the niche.
Using installation aids to set the correct distance for cabinet doors.
Steps for drawing a center line, hanging the mounting frame, and securing it.
How to adjust the door's sides and height using adjusting bolts for even gaps.
Steps to adjust the door depth for a 1/16" gap between the door and cabinet carcase.
Final checks for proper door closure, alignment, and seal seating using a lamp.
To Next Page
