This merging kit should be used for
side-by-side installation of the following
models:
–
K 18x1 Vi, K 19x1 Vi
–
F 14x1 Vi, F 18x1 Vi, F 19x1 Vi
–
KF 18x1 Vi, KF 19x1 Vi
–
KWT 16x1 Vi
Before you begin
Please read all instructions in this
manual, as well as the manual which
accompanied your machine, before
installation and use.
This appliance is top-heavy and
must be secured to prevent the
possibility of tipping forward.
Keep the doors closed until the
appliance is completely installed
and secured per the installation
instructions.
To reduce the risk of injury or
damage to the product, two people
should be used for installation.
Side-by-side
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
Installing the heating mat will
increase energy consumption.
en
3
To Next Page
Loading...
Need help?
General