Cooking zone display
n Displays:
0 = Cooking zone ready for use
1 to 12 = Power levels
# = Residual heat
ß = No pan on cooking zone or pan unsuitable
(see "Induction")
F = Fault (see "Safety switch-off")
A = Auto heat-up when the power level range has been extended
P0 etc. = Programme (see "Programming")
S0 etc. = Status (see "Programming")
o Indicator lamp for extending the power level range (see "Programming")
p Light-ring: The number of curved lines lit up equates to the power level chosen
(exception: see "Cooking with Auto heat-up")
q This segment lights up when a booster is engaged
Guide to the appliance
5
To Next Page
Loading...
