en - Securing a side-by-side combination
46
In addition, press both anti-tip brack-
ets together with a pipe wrench.
From the top, insert the shorter of the
supplied metal clips into the fixing
lugs. If required, use a hammer.
Now loosen the screws on the tops of
the appliances again and remove
both anti-tip brackets.
You will need the anti-tip brackets to
secure the niche.
Then reinstall the screws on the tops
of the appliances.
Tip: Now you can continue installing
the appliances. For this purpose, ob-
serve the operating and installation in-
structions supplied with each of the ap-
pliances.
Insert the cover strip into the gap
between the refrigeration appliances.
You have now finished installing the
side-by-side combination.
To Next Page