Need help?Do you have a question about the Miele KWT 6831 SG and is the answer not in the manual?
General| Capacity | 34 bottles |
|---|---|
| Temperature Zones | 2 |
| Temperature Range | 5 - 20 °C |
| Control Type | Electronic |
| Energy Efficiency Class | A |
| Door Material | Glass |
| Shelves Material | Wood |
| Reversible Door | Yes |
| Digital Display | Yes |
| LED Lighting | Yes |
| Lock | Yes |
| Type | Wine Cooler |
| Width | 60 cm |
| Height | 820 mm |
| Appliance category | Wine Storage |
Defines the intended use of the appliance for storing wine in domestic environments, not for other purposes.
Provides safety guidelines for supervising children around the appliance to prevent accidents and misuse.
Covers critical safety aspects related to the appliance's cooling system, coolant (R600a), and electrical connection.
Details proper operating conditions, climate range, and prohibited uses to ensure safety and appliance longevity.
Outlines methods and warnings for cleaning the appliance to prevent damage and ensure safety.
Discusses ideal temperature ranges for wine storage and maturation for optimal quality.
Explains the safety thermostat that protects wine from extreme cold by automatically switching on a heater.
Step-by-step guide on setting precise temperatures for each of the three wine conditioning zones.
Details the dynamic cooling function for maintaining consistent humidity and temperature distribution.
Describes how the appliance alerts the user to temperature deviations in any zone with audible and visual signals.
Explains the alarm that sounds if the appliance door is left open too long.
Procedures for cleaning the appliance's exterior and interior surfaces using appropriate agents.
Instructions on how to replace the active charcoal filters to maintain optimal air quality.
Troubleshoots issues where the appliance is not cooling properly or the display is off.
Addresses problems related to frequent compressor cycling causing temperature drops and inefficiency.
Interprets error messages, symbols, and codes displayed on the appliance control panel.
Details electrical safety requirements and connection procedures for the UK market.
Guidance on choosing a suitable installation location, considering sunlight, heat sources, and ventilation.
Requirements for ensuring adequate ventilation around the appliance for efficient operation and energy saving.
Step-by-step instructions for safely removing the appliance door, noting its heavy weight.
Detailed guide on relocating the soft-close mechanism for left-hand door hinging.
Instructions on how to move the bearing block and its associated components for door reversal.
To Next Page