Operation
Automatic cooking using a weight
entry (g Q)
There is a choice of 8 programmes.
Programme Type of food
C 1
C 2
C 3
C 4
C 5
C 6
C 7
C 8
Chicken
Jacket potatoes
Beef, well done
Beef, medium
Beef/ Lamb, rare
Lamb, medium
Lamb, well done
Pork
Press the g Q touchpad.
C 1,
4 the symbol for microwave
mode and AUTO light up, the weight
symbol g flashes.
Press the g Q touchpad enough
times to select the programme you
require.
Use the rotary control to enter the
weight (25 g – 4000 g).
The weight entered,
4 the symbol
for microwave mode and AUTO light
up, the
h symbol and +/- flash.
Press the +/- function touchpads to
lengthen or shorten cooking time.
For example, if you press the +
touchpad twice, 2 and + appear in
the display area. This indicates that
you have chosen the longest cook-
ing time.
Press the h START touchpad.
The necessary cooking time is calcu-
lated automatically. This time will ap-
pear in the display area and begin to
count down in one second steps.
To achieve good results, turn or rear-
range the food during the cooking pro-
cess.
When the tone sounds, open the door
and either turn or rearrange the food.
Then close the door and press the
h
START touchpad to continue the in-
terrupted process.
An audible tone also sounds when the
time has elapsed.
The time of day reappears in the dis-
play area.
Leave the food to stand at room tem-
perature for a few minutes after cook-
ing, (standing time), so that the tem-
perature is distributed more evenly
throughout the food.
Operation
25
To Next Page
Loading...
