^
Press the relevant button repeatedly
until the Automatic programme
required shows in the display. For
example, to call up programme AC 5
; (Chicken, small, whole), press the
° button five times.
g or lb will flash in the display to
request the weight to be entered, and
the programme (e.g. AC 5) will light up,
together with the symbols for the
functions being used (h for Microwave
and n for Grill).
^ Use the rotary selector to enter the
weight.
^ Press the Start button.
The duration (which depends on the
weight) will begin to count down, and
the symbols for the functions that are
currently in use will light up (h and/or
n).
An audible tone will sound halfway
through the cooking duration.
^
Interrupt the programme to turn or stir
the food, and then continue the
programme.
The programmed duration can, if
necessary, be extended by a few
minutes during operation by pressing
the Start button repeatedly until the
duration required shows in the display.
On all programmes it is only possible to
extend the duration by a few minutes.
An audible tone will sound when the
cooking programme is complete.
The interior lighting will go out.
Operation - Automatic programmes
46
To Next Page
Loading...
