Need help?Do you have a question about the Miele PW 6201 and is the answer not in the manual?
General| Appliance Type | Commercial Washer |
|---|---|
| Spin Speed | Up to 1400 rpm |
| Energy Efficiency Class | A+++ |
| Noise Level (Spinning) | 74 dB |
| Water Connection | Cold water |
| Controls | Electronic |
| Programs | Cotton, Synthetics, Delicates |
| Special Features | Honeycomb drum, Automatic load detection, Delay start |
| Dimensions (HxWxD) | 850 x 600 x 700 mm |
Essential safety precautions and warnings for operating the washer to prevent injury and damage from misuse or hazardous substances.
Critical safety information regarding electrical connections, grounding, repairs, and protective features of the washer.
Guidelines for safe operation, handling of chemicals, interaction with children, and proper use of accessories.
Identification and basic function of key external components of the Miele washer.
Detailed explanation of the washer's control panel, including display, buttons, jog shuttle, and card reader.
Explanation of control key functions, jog shuttle use, and how to operate the machine using program cards.
Step-by-step guide on turning on the washer, sorting, and correctly loading laundry into the drum.
Instructions on adding detergents, fabric softeners, including dosage based on water hardness.
How to select washing programs and choose additional options like pre-wash, starch stop, and spin stop.
Guide to setting delay start, adjusting parameters like temperature and spin speed, and starting the selected program.
Procedures for canceling programs, handling locked programs, and managing cycle interruptions.
Instructions on using program cards for loading and managing washing programs on the machine.
Steps to select and change the display language on the washer's control panel.
Overview of the liquid dispensing system, its calibration, and maintenance procedures.
Procedures for calibrating dispensing pumps and performing routine maintenance for optimal performance.
Information on load size monitoring, peak load cut-off, and PC connection for program management.
Instructions for cleaning the washer after each use, including exterior surfaces, door gasket, and stainless steel.
Guidance on cleaning specific internal parts like drip channels, siphons, vent grilles, and water inlet filters.
Procedures for drum bearing lubrication and general maintenance for periods of extended downtime.
Resolving common problems like oversudsing, door lock failures, and understanding detergent usage.
Procedures for handling power failures, including emergency door release and manual draining of the machine.
Understanding service interval indicators and general fault messages displayed by the washer.
Step-by-step solutions for specific fault messages like water intake, drain, heating, motor, and imbalance errors.
Information on how to contact Miele Technical Service for support, including required machine details and error reporting.
Explanation of symbols and technical data found on the machine's data plate, including noise level specifications.
Guidelines for the environmentally responsible disposal of packing materials and old appliances.
Recommendations for selecting a suitable installation site, ensuring proper leveling, and avoiding adverse environmental conditions.
Step-by-step instructions for removing shipping struts before operation and saving them for future transport.
Requirements and procedures for connecting water supply valves and drain hoses according to regulations.
Guidelines for safe electrical connections and instructions for steam supply and dispensing pump connections.
A summarized guide to the fundamental steps for sorting laundry, operating the machine, and completing a wash cycle.
To Next Page
